Our robot

RINNO Humanoid Our humanoid robot, the platform on which we develop technology for industrial robots.

For RINNO we developed our own drives, electronics and control. That is why we now build custom industrial robots faster and more precisely, without depending on off-the-shelf components.

MobilityWalking and balance
ManipulationHandling objects
ApplicationReal-world spaces
RINNO humanoid robot walking, developed in Croatia
WalkingRINNO Humanoid
All in-house

Every system developed in‑house.

Developing a humanoid robot is one of the most complex challenges in robotics: mechanics, electronics and software must work as a perfectly coordinated whole in an unpredictable world. By developing every key component ourselves, we keep full control over the system and solve each challenge directly at its source.

RINNO humanoid robot from the front with its systems marked: actuators, mechanics, electronics, control and software 01 02 03 04 05
  1. 01

    Actuators

    Drive modules in every joint: motor, transmission, sensors and control electronics in one housing, tailored precisely to the task.

  2. 02

    Mechanics

    A structure engineered for the dynamic loads of walking. We machine the parts on our own CNC machines.

  3. 03

    Electronics

    Circuit boards, power supply and wiring designed so that all drives work reliably and in sync.

  4. 04

    Control

    Motion and balance algorithms that enable stable walking and precise arm movements.

  5. 05

    Software

    From actuator firmware to the interface that controls the entire robot, in one system.

RINNO humanoid robot picking up an object and placing it in a box
In real spaces

Ready for work in real-world environments.

RINNO works in spaces built for people, without special adaptations. It moves around, picks up objects and places them where they need to go.

For us, the humanoid robot is not just a standalone project but a development platform on which we research, develop and test advanced technologies. The knowledge and solutions gained from it go directly into our industrial robots and automation systems.

Coming soon Commercial version of RINNO

We are preparing a commercial version of the humanoid. Get in touch if you are interested.

This technology is already running on production lines.

See an example →
Latest project · Meat industry

RINNO Cartesian

An industrial robot for meat packaging lines. Two cameras monitor the conveyor and its surroundings, while the robot picks up pieces, inspects and weighs them, and places them in packaging in under a second.

RINNO Cartesian, an industrial pick and place robot on a meat packaging line
In operationPackaging line
Industrial robot placing pieces of meat into trays on a packaging line

Challenge

Placing meat into trays by hand is monotonous, strenuous work in a cold facility, and every package has to be weighed and checked.

Solution

The robot sees every piece through its cameras and decides how to grip it. It handles all types of meat, and when the product changes, it switches tools on its own. It learns with every piece and keeps getting more precise.

90/minpackages per minute
2camerasreal-time vision
All typesof meat on one machine
Automatictool change
Seescameras monitor the conveyor and surroundings
Pickswith the right tool for the product
Inspectsquality and weight
Packsinto the tray on the line
Logsand sends data to the system
More about industrial robots →
Featured projects

From our production.

A selection from the many robots, robotic arms and machines we have developed for our own production and for our clients.

G-Bot robotic arm welding an aluminium bicycle frame
Welding
G-Bot, a seven-axis robotic arm for welding
7-axis arm
Robotic welding

G-Bot

A seven-axis robotic arm we developed for welding aluminium bicycle frames.

Welding thin-walled aluminium by hand takes a top welder, and results vary from piece to piece. G-Bot welds every frame exactly the same.

Axes7
Precision0.02 mm
MaterialAluminium
ApplicationBicycle frames
More about robotic arms →
In-house built CNC machine machining aluminium
In operation
Finished custom CNC machine from our production
Finished machine
Machining

Our CNC machines

We design and build 3-axis and 4-axis CNC machines for machining aluminium and steel.

We adapt the machine to the parts it has to make, not the other way round. We build them for our own production and to order for other companies.

Axes3 or 4
MaterialsAluminium, steel
DesignCustom-built
ForUs and to order
GuideB electric bikes with aluminium frames
GuideB e-bikes
E-mobility

GuideB electric bikes

Electric bikes for everyday riding and tourism. Frame, drive, battery and control electronics were developed as one whole, so everything works in harmony.

Alongside them we developed a rental system: smart charging stations, fleet management and a user app.

Aluminium frameBattery and electronicsSeries productionRental with charging stations
Self-driving electric car presented in 2018
Presented in 2018
Our first project

Self-driving electric car

A self-driving electric car that we developed and presented in 2018.

It was the first time we brought structure, electric drive, electronics and autonomous driving software together in one vehicle. That experience is the foundation of all our later projects.

Presented2018
DriveElectric
DrivingAutonomous
BodyOwn design
For you

Need a robot that doesn’t exist on the market?

We develop custom industrial robots and robotic arms for processes where off-the-shelf solutions don’t fit. One team leads the project, from the first analysis to commissioning.

01

Custom robots

An industrial robot developed for a specific task in your production, from analysis to commissioning.

More about industrial robots →
02

Production automation

Robotisation of production lines: pick & place, packaging, welding and camera-based quality control.

More about production automation →
03

Product development

Mechanics, electronics and software for your product, from prototype to series production.

Electronics and mechanical design for industrial robots
DevelopmentElectronics and design
Contact

Tell us what you need.

Planning to robotise or automate your production? Describe your process and we will get back to you with a proposed solution.

Headquarters: Runović 553, 21261 Runović, Croatia
Offices: Slavonska avenija 24a, 10000 Zagreb, Croatia

Inquiry for a custom robot

Describe what you need. We will get back to you with a proposed solution.